ALABAMA DEPARTMENT OF ENVIRONMENTAL MANAGEMENT

NOTICE OF A PROPOSED SOLID WASTE PERMIT MODIFICATION UNDER THE ALABAMA SOLID WASTES & RECYCLABLE MATERIALS MANAGEMENT ACT AND REQUEST FOR COMMENTS
PUBLIC NOTICE – 422

Winston County

Pace Industries Inc. has submitted to the Alabama Department of Environmental Management (ADEM) an application to modify the current permit for the Pace Industries, Inc. Lynn Landfill (Permit No. 67-13).  On November 19, 2020, the Town of Lynn, Alabama approved the expansion of the Pace Industries, Inc. Lynn Landfill.  The landfill is described as being located in Sections 34 and 35, Township 11 South, Range 10 West in Winston County.  The proposed modification expands the permitted facility boundary from 75.93 acres to 96.84 acre and the permitted from 60.89 acres to 78.83 acres.  All previously approved variances and permit conditions would remain unchanged.

The waste stream for the Pace Industries, Inc. Lynn Landfill would remain non-hazardous construction/demolition waste including but not limited to masonry materials, sheet rock, roofing waste, insulation materials, tires, rebar, scrap materials, paving materials, and wood products.  Also, the landfill would accept the following industrial wastes from Dal Tile Corporation: scrap wood products, green tile (wet and dry), fired tile, clay, shale, Fernsprings clay, Mary Lee clay, miscellaneous waste packaging materials and floor sweepings (primarily clays and shale) and Winfield Rubber Manufacturing Company, Inc. SBR tread rubber.  The service area for the Pace Industries, Inc. Lynn Landfill would remain the State of Alabama.  The maximum average daily volume of waste disposed at Pace Industries, Inc. Lynn Landfill would remain 750 tons per day.

Copies of the public notice and proposed permit are available for public inspection electronically via www.adem.alabama.gov/newsEvents/publicNotices.cnt and the complete application is available at the following location Monday – Friday (except legal holidays), 8:00 am to 5:00 pm by appointment.  A nominal fee for copying and/or mailing may be charged.  Arrangements for copying should be made in advance.

Russell A. Kelly, Chief
Permits and Services Division
ADEM
1400 Coliseum Blvd.
[Mailing address: PO Box 301463; Zip 36130-1463]
Montgomery, Alabama 36110-2400
(334) 271-7714
permitsmail@adem.alabama.gov

Persons wishing to comment may do so, in writing or by email, to the Department's named contact above within 35 days following the publication date of this notice.  In order to affect final decisions, comments must offer technically substantial information that is applicable to the proposed permit.

A written request for a public hearing may also be filed within that 35-day period and must state the nature of the issues proposed to be raised in the hearing.  The Director shall hold a public hearing upon receipt of a significant number of technical requests.

After consideration of all written comments, review of any public hearing record, and consideration of the requirements of the Alabama Solid Wastes & Recyclable Materials Management Act, and applicable regulations, the Department will make a final determination.  The Department will develop a response to comments, which will become part of the public record and will be available to persons upon request.  Notice will be sent to any person requesting notice of the final action.

The Department maintains a list of interested individuals who are mailed legal notices regarding proposed permits. If you wish to receive such notices, contact the Permits & Services Division via telephone (334-271-7714), e-mail (permitsmail@adem.alabama.gov), or postal service (P.O. Box 301463, Montgomery, AL  36130-1463).

Notice is hereby given this 12th day of January, 2022, by authorization of the Alabama Department of Environmental Management.

_________________________
Lance R. LeFleur
Director

Nondiscrimination Statement: The Department does not discriminate on the basis of race, color, national origin, sex, religion, age or disability in the administration of its programs.